Australia’s No. 1 trusted pool paint for residential & commercial applications

LUXAPOOL® Product Range

Epoxy Pool Paints

LUXAPOOL® (2-pack) Epoxy Pool Paints

LUXAPOOL® (2-pack) Epoxy Pool Paints

are excellent for all new swimming pool applications and can be used to give a beautiful luxury finish to older pools. LUXAPOOL® Epoxy Pool Paints are also well suited to application over old and new cement render, fibreglass, marblesheen and also previously painted epoxies.

Available in a 3.5L kit & a 1L kit. Coverage: 20 – 25m2 per 3.5lt kit / per coat (minimum of 2 coats recommended)  

Purchase Online
LUXAPOOL® Epoxy Primer-Sealer

LUXAPOOL® Epoxy Primer-Sealer

is designed for use as the first coat for cement render and concrete pools, or as the first coat for marblesheen and small pebble surfaces. It penetrates and seals such surfaces in order to provide a sound and tightly bound surface for following Epoxy colour coats.

USE AREAS: swimming pools, water tanks, fish ponds & aquaculture ponds.

Available as a 4 Litre kit.
Coverage:
approx. 25-30m2 per 4L kit, per coat.

Purchase Online

Chlorinated Rubber Pool Paints

LUXAPOOL® Chlorinated Rubber Paints

LUXAPOOL® Chlorinated Rubber Paints

have been formulated for use over old or new concrete based swimming pools. It can be applied by brush, roller or spray, displaying excellent adhesion over sound previously painted chlorinated rubber coated surfaces. It has been especially formulated to resist the destructive effects of swimming pool chemicals and has a well proven record of longevity along with durability.

Available in 4L & 15L sizes. Coverage: approx. 25-30m2 per 4L kit, per coat.

Purchase Online
LUXAPOOL® Solvent CRS

LUXAPOOL® Solvent CRS

is formulated for thinning of chlorinated rubber coatings, normally for first coat application. May also be used for cleaning of application equipment used for chlorinated rubber application.

Available in 1L, 4L and 15L sizes

Purchase Online

Accessories & Products for Pool Painting Preparation

LUXAPOOL® SEF (Structural Epoxy Filler)

LUXAPOOL® SEF (Structural Epoxy Filler)

is a fully formulated, under-water grade, 2-pack Epoxy Filler designed for surface repair and medium/fine surface filling prior to the application of LUXAPOOL® Epoxy finishes. LUXAPOOL® SEF is an engineered immersion grade, 2-pack epoxy filler designed for the surface repair of all cement based, ‘pebblecrete’, fibreglass and epoxy surfaces. It may be used on vertical or horizontal surfaces normally without any temporary formwork. NOT RECOMMMENDED for repairs which will be finished with chlorinated rubber coating.

Available in 600mL, 2L & 4L kits

Purchase Online
LUXAPOOL® Concentrated Wash

LUXAPOOL® Concentrated Wash

is a ‘non caustic’ amine detergent concentrate specially formulated for removing body oil and sunscreen oil residues, and other contaminates prior to commencing any surface preparation for any LUXAPOOL® finishes.

Available in 500mL & 5L sizes

Purchase Online
LUXAPOOL® Solvent A

LUXAPOOL® Solvent A

is a fast evaporating solvent for controlled FIRST COAT thinning of epoxy finishes. Should never be used for thinning of epoxy mid or top coats.

Available in 1L, 4L & 20L sizes

Purchase Online
LUXAPOOL® Solvent LT

LUXAPOOL® Solvent LT

SOLVENT ‘LT’ is a slow evaporating solvent for cleaning of all equipment used in application of epoxy finishes.

Available in 1L, 4L & 20L sizes

Purchase Online

Poolside & Paving Products

LUXAPOOL® Poolside & Paving

LUXAPOOL® Poolside & Paving

is a water-based, rubberised, P5 rated non-slip coating system that is easy to apply and provides a safe and durable decorative surface for most small pebble, concrete and paved areas. It may be easily varied during application to a range of non-slip effects. Areas of use include:

  • Pool surrounds, decks, patios, balconies
  • Boat decks, pontoons, wharf & landing dock surfaces
  • Steps, stairs and walkways

LUXAPOOL® Poolside & Paving is available in a range of 15 stylish colours.

Available in 15 Litre size, with selected colours in 4 Litres.

Coverage: Allow 1L per m2 total coverage.

Purchase Online
ACRYLMERIC® Superseal Primer

ACRYLMERIC® Superseal Primer

is a transparent, solvent based acrylic resin solution designed to penetrate and seal substrates. It is ideal for use as a primer for all LUXAPOOL® Poolside and Paving applications. ACRYLMERIC® Superseal Primer ensures excellent adhesion to most substrates, eliminates uneven absorption of subsequent coatings and minimises the possibility of loss of adhesion and efflorescence resulting from the leaching of residual alkali from the substrate. Usually requiring only one coat, ACRYLMERIC® Superseal Primer is suitable for internal and external application on surfaces such as masonry, concrete, cement render, brickwork, block walls, columns and beams, etc.

Available in 1L, 4L & 20L sizes.

Coverage: 6 – 8m2/Litre = 1 x 4L tin per 24 – 32m2

Purchase Online
UNICRYL HD Clear Glaze

UNICRYL HD Clear Glaze

is a single pack modified acrylic-polyurethane clear coating that enhances the durability of LUXAPOOL® Poolside & Paving trafficable surface coatings. It provides a gloss protective clear surface that adds durability to trafficable surfaces, and enhanced water and weather resistance to vertical surfaces. Application of Unicryl HD Clear Glaze will also enhance the final colour effect and reduce ‘blocking’ of heavy items later placed on the surface. Apply using short or medium nap roller to thoroughly wet the surface of the underlying profile.

Available in 4L and 15L sizes.

Coverage: approximately 6m2/Litre = 24m2/Tin (dependant on surface profile).

Purchase Online
Colour Guide for LUXAPOOL Epoxy Swimming Pool Paint

The LUXAPOOL® pool paint brochure provides helpful pool paint selection and application advice along with a comprehensive pool paint colour guide.

LUXAPOOL Poolside & Paving Colour Guide

The LUXAPOOL® Poolside & Paving brochure presents the complete range of Poolside & Paving colours and includes handy application advice.

Commercial pool repaint using LUXAPOOL® Epoxy Pool Paint in Pacific Blue. By John Charmichael (QLD).

AUSTRALIA’S NO. 1 TRUSTED SWIMMING POOL PAINT

If your swimming pool is in need of a makeover, then LUXAPOOL® pool paints are your first choice. LUXAPOOL® is the No. 1 trusted swimming pool paint brand in Australia, selected by professional Pool Paint Applicators and DIY Renovators alike, for the product’s superior finish, durability and longest lasting results.

Developed and perfected over 45 years through intensive research and development by Australian coatings company Colormaker Industries; LUXAPOOL® swimming pool paints are the trusted brand for both residential and commercial projects.

With LUXAPOOL premium products, you get what you pay for; a premium product.  Our product is not the cheapest on the market, but the quality is unsurpassed as we source and import only the finest raw materials available. In addition, LUXAPOOL® epoxy features higher solids content than other brands, which means that you get better film build, delivering a pool finish which looks like new for longer, and consistently delivers years longer coating life.

TWO EXCELLENT SWIMMING POOL PAINT FORMULATIONS

LUXAPOOL® (2-PACK) EPOXY POOL COATINGS:

Excellent for all new swimming pool applications, LUXAPOOL® Epoxy Pool Paint can be used to give a beautiful luxury finish to older pools, as well as painting over old and new cement render, fibreglass, marble sheen, pebblecrete and previously painted epoxies.

LUXAPOOL® Epoxy Pool Coatings deliver a smooth and hard surface, which is very easy to maintain, and a durable finish with improved resistance to chalking. This product also offers resistance to the effects of salt-water and chlorinated chemicals, is algae controlled and safe for use with fish and mammals.

Click here to purchase

Browse through our painted pools photos to see our stunning selection of 25 designer colours.  You’ll notice sometimes the pool colour can look different once the water goes in the pool.

LUXAPOOL® CHLORINATED RUBBER COATINGS:

Formulated for use over old or new concrete based swimming pools, LUXAPOOL® Chlorinated Rubber Pool Paint can be applied with a brush, roller or spray. It displays excellent adhesion over sound previously painted chlorinated rubber coated surfaces. It has been especially formulated to resist the destructive effects of swimming pool chemicals and has a well-proven record of longevity and durability. Our Chlorinated Rubber product features fine sealing properties and a hard satin surface finish, which is easy to maintain, provides resistance to salt-water and chlorinated chemicals and is algae controlled. It can be easily re-coated when desired. Click here to purchase

DIY SWIMMING POOL PAINTING

DO IT YOURSELF SWIMMING POOL PAINTING

LUXAPOOL® makes it easy for DIYers. If you plan to paint your pool yourself, consult our easy to follow Pool Painting Guides or click here to read a practical step by step guide to painting your pool.  LUXAPOOL® provides a detailed application guide for every type of pool surface.

HOW MUCH POOL PAINT DO I NEED?

You can work out how much LUXAPOOL® pool paint you require for your project by using our Pool Paint Calculator. This calculator is a user-friendly tool, which also ensures you select the correct pool paint formulation for your existing pool surface. For swimming pool paints that you can rely on, choose LUXAPOOL®. Click here to find your closest LUXAPOOL® stockist or buy LUXAPOOL® online.

TOP 5 TIPS TO PAINTING YOUR POOL

  1. Ensure you have good weather (you will need at least 5 fine days in a row to paint your pool)
  2. Check if the pool paint is compatible with your current pool surface (consult LUXAPOOL®
    who can provide you with further information on how to do this). There are two types of pool paint: Epoxy pool paint or Chlorinated Rubber pool paint.  You need to select the correct type for your pool surface.
  3. Select the right pool paint colour for your pool (note: pool paint colours look different when immersed in water or if the pool is empty; and can vary according to the weather, the time of day, pool lighting and surrounds). Best practice is to check colour panels under water before emptying the pool.
  4. Preparation of the pool surface is vital to a good result (ie: patching any cracks, abrading the surface and applying the appropriate Primer if required)
  5. Once you have painted your swimming pool, leave the pool surface to cure for at least 5-7 days (in warm weather) before refilling your pool.

Click here for a more detailed how-to guide for DIYers painting their own pool.

NEED FURTHER ADVICE?

If you have any questions consult the swimming pool paint experts, by phoning 1300 LUXAPOOL or emailing help@luxapool.com.au